Liquid Neoprene – 1 litre – Rigid, Semi-rigid, Flexible, Superflexible
Liquid Neoprene, a latex based product which is fantastic for casting, very light and hard wearing and can be drilled and sanded and painted. Comes ready to pour into a clean plaster mould and is white in colour, drying to a ‘natural’ flesh colour (black version available also)
Allow to stand for 1 to 5 hours depending on the thickness of cast you require, then the slurry or slip is poured out of the plaster mold. This excess is reusable. The lining or casting that builds up on the walls of the plaster mould is allowed to dry overnight then removed for further drying, 2 to 3 days preferably before sanding and painting.
How to Use
1. Pour the liquid latex casting compound into CLEAN, DRY, PLASTER MOLD, The Liquid Neoprene requires no on site compounding. Just stir lightly, and start to use. Allow to set in the mould approximately 1 to 5 hours for desired build-up. The liquid level may drop due to absorption. This is normal, just top it off with additional casting compound if necessary.
2. After the allotted time, pour off the casting compound. This can be poured back into the container and can be used again (provided it has not been contaminated). Allow for the mould to drain and dry overnight, or about 12 to 14 hours.
3. When the Neoprene is dry, it can be removed from the mould. This must be done carefully. Allow the casting to stand for 4 to 6 days for curing. Then it is ready to be sanded, drilled, painted.
NOTE: should be stored at room temperature. This product MUST NOT be allowed to freeze.
Liquid Neoprene – 1 litre – Rigid, Semi-rigid, Flexible, Superflexible:
Liquid Neoprene, a latex based product which is fantastic for casting, very light and hard wearing and can be drilled and sanded and painted. Comes ready to pour into a clean plaster mould and is white in colour, drying to a ‘natural’ flesh colour (black version available also) Allow to stand for 1 to 5 hours depending on the thickness of cast you require, then the slurry or slip is poured out of the plaster mold. This excess is reusable. The lining or casting that builds up on the walls of the plaster mould is allowed to dry overnight then …
- Item Price: £12.45
- Listed On: January 29, 2012
Share This Item:
Featured Products
-
Barge Cement ̵...
Good for bonding most rubber compounds and leather, toluene free and waterproof
-
Lumina Air dry pol...
Lumina clay is an air dry polymer clay. It is waterproof, Translucent, Highly flexible, durable, acid free and non toxic.
-
Permastone –...
Just add water and stir PermaStone mixture slowly until the consistency of heavy cream. Will not shatter when dropped. Fractured breaks are easily repaired. Carve and drill will produce crisp edges and a smooth surface. Buff to a high luster or finish with any stain or paint. Exterior grade when sealed. Low exotherm (generates less heat than comparable products). Embed hangers pin backs or magnets in wet mixture 2-3 minutes after pouring. Bisque white color.
-
Rigid Wrap –...
Activa Rigid-Wrap Plaster Cloth is a versatile, high-quality plaster gauze product made to the specifications of artists and craftspeople. It is for use in sculpture, mask making, jewelry, craft projects, and more. Its even texture allows for fine detail and smooth work. Just wet it, shape it, and dry it. It may be microwaved, oven, or air dried. It accepts all finishes. When face casting, the use of a release agent such as petroleum jelly is recommended.
-
Liquid Neoprene &#...
Liquid Neoprene, a latex based product which is fantastic for casting, very light and hard wearing and can be drilled and sanded and painted. Comes ready to pour into a clean plaster mould and is white in colour, drying to a ‘natural’ flesh colour (black version available also) Allow to stand for 1 to 5 hours depending on the thickness of cast you require, then the slurry or slip is poured out of the plaster mold. This excess is reusable. The lining or casting that builds up on the walls of the plaster mould is allowed to dry overnight then …